Surgelogic - Surgelogic® External Brick Surge Protective Device (SPD)

Surgelogic

Home

Old Home

Solutions

Commercial

Surgelogic® External Brick Surge Protective Device (SPD)

Surgelogic® External Brick Surge Protective Device (SPD)

External Brick Assembly (EBA) devices are available for use in service entrance or branch panel locations. Our EBA Series products provide a complete line of application solutions and meet the requirements of ANSI/IEEE C62.41 and C62.45, and UL 1449 Third Edition Requirements. Peak surge current ratings per phase range from 120 kA to 240 kA and all units have a Short Circuit Current Rating of 200kA. Features include:

Standard product protection modes L-N, L-G, L-L, and N-G
Individually fused suppression modes
Thermal cutout
Solid state bi-directional
Audible Alarm
Dry Contacts
LED Indicators indicate loss of protection, or fully operational circuit
High-energy parallel design for ANSI/IEEE C62.41 and C62.45 category B and C3 applications
Short Circuit Current Rating: 200kA
EMI/RFI filtering up to -30dB (100 kHz to 100 MHz)
10-year warranty

Options Include:

Surge Counter. The surge counter displays the combined total number of transient voltage surges detected from line-to-ground, line-to-line, line-to-neutral and neutral-to-ground since the counter was last reset.
Integral Disconnect - provides a mechanical means to electrically isolate the entire surge suppressor to facilitate the servicing of the unit's components.
Remote Monitor (Catalog No. TVS12RMU) - displays the alarm status of the surge protective device up to 1,000 ft (305m) away from the unit. Available as a separate part number and works with the dry contacts on all EBA Series SPD units.

Documentation:

SiteMap